|
|
| Post Number: 1
|
bee4u 
Group: Members
Posts: 10
Joined: Sep. 2012
|
 |
Posted on: Sep. 04 2012,12:03 |
|
   |
Hi i have an issue with easyboot 6.53 that is i used Xp winpe
to boot from easyboot...only once it booted from cd well afterwards when i made new Xp winpe cd with easyboot 6.53 .. it starts the Xp winpe from cd then i get BSOD..?
Xp winpe from cd is not starting with easyboot.
i checked it without easyboot it runs perfectly from cd well.
why easyboot is not starting Xp winpe from cd....any clue..?
THX....!
|
 |
|
|
| Post Number: 2
|
balder
Group: Members
Posts: 1942
Joined: Oct. 2008
|
 |
Posted on: Sep. 04 2012,13:10 |
|
 |
@bee4u
Quote: "Hi i have an issue with easyboot 6.53 that is i used Xp winpe"
What method did you use to launch XP-winpe 
Examples:
Method 1.
(standard procedure when run from CD\DVD-unit)
Copy (or extracted from ISO) files and folders to folder disk1 and use menu command in easyboot menu: run W2KSECT.BIN
Note: check that file W2KSECT.BIN is in folder EZBOOT - file should be there
And only tick 'Joliet' when creating ISO in EasyBoot
Method 2.
(by me recommended method works from CD\DVD and also USB drive)
Use my script 'easyboot-iso.script' and use XP-winpe ISO-file as it is (not extracting any files or folders - use ISO-file instead)
Note: you cannot simply copy XP-winpe ISO-file to folder EZBOOT and use menu command 'run' or 'bcdw' to launch ISO-file, as this is an NT5-system (typically ERD, BartPE or Reatogo or similar are examples on NT5-PE)
You must use my script 'easyboot-iso.script' and tick 'Run ISO from RAM' in script to run ISO from RAM in an correct way.
regards balder
Edited by balder on Sep. 04 2012,13:11
--------------
Download complete set of scripts including help file HERE
Note: Script collection updated 2019-05-19. Scripts mainly support EasyBoot_6.5 or later
|
|
|
|
| Post Number: 3
|
bee4u
Group: Members
Posts: 10
Joined: Sep. 2012
|
|
Posted on: Sep. 04 2012,15:57 |
|
|
THX... balder... 
i have copied XP-winpe ISO-file to folder EZBOOT and used menu command run winxp.iso to launch ISO-file.
i am using it from cd not from usb..it is supposed to run form cd as you mentioned in the forum ...
|
|
|
|
| Post Number: 4
|
balder
Group: Members
Posts: 1942
Joined: Oct. 2008
|
|
Posted on: Sep. 04 2012,16:03 |
|
|
@bee4u
Quote: "have copied XP-winpe ISO-file to folder EZBOOT and used menu command run winxp.iso to launch ISO-file"
You misunderstood me 
You cannot run ISO this way - it halts with BSOD 
You must use my script 'easyboot-iso.script' to integrate ISO into easyboot 
Script automatically show menu command to use in easyboot menu (copy and paste into easyboot menu).
Please double-click to 'READ_ME.html' in folder balder and find the flash-movie that exactly describe the procedure in 'easyboot-iso.script' to integrate XP-winpe
Note: it doesn't matter from where you run ISO - it still must be run from RAM in an special way
regards balder
Edited by balder on Sep. 04 2012,16:04
--------------
Download complete set of scripts including help file HERE
Note: Script collection updated 2019-05-19. Scripts mainly support EasyBoot_6.5 or later
|
|
|
|
| Post Number: 5
|
bee4u
Group: Members
Posts: 10
Joined: Sep. 2012
|
|
Posted on: Sep. 04 2012,18:32 |
|
|
THX ....MY DEAR balder... i have seen your 'READ_ME.html' in folder balder and watched the movie...thats great... i tried it worked, but could you tell me why it runs from cd without easyboot ..? and ONCE ONLY ONCE i tried this "copied XP-winpe ISO-file to folder EZBOOT and used menu command run winxp.iso to launch ISO-file" it worked..!!!..later so many tries no working..!!
Edited by bee4u on Sep. 04 2012,21:33
|
|
|
|
| Post Number: 6
|
balder
Group: Members
Posts: 1942
Joined: Oct. 2008
|
|
Posted on: Sep. 05 2012,02:27 |
|
|
@bee4u
Quote: "but could you tell me why it runs from cd without easyboot"
You actually do not run the specific ISO from CD in that case - YOU BURN THE CONTENTS OF ISO to CD and files and folders can hereby be accessed from the 'root' on CD (you can visually se files and folders on the CD which is not the case with ISO-file of WinXP-PE - you can se the ISO but not the files - you need a program to access files and folders inside ISO, don't you 
That's the difference (I'm sure you agree that that is a major difference)
However when you launch ISO directly from EasyBoot, files are 'hided' inside ISO and is not present on the 'root' (folder disk1 is the root in EasyBoot) and are not accessible as files are not present on the 'root' (folder disk1)
Anyway... Great you managed to make it work 
Note: you can even launch such ISO from USB via EasyBoot menu, but you cannot launch setup of WinXP this way - but that is a different story...
Quote: "it worked"
You most likely had folder I386 in folder disk1 at the same time.
If files and folders at same time is present in folder disk1 it works, as Windows-PE can 'find' what it needs when 'looking' on the root (folder disk1) even you launched the ISO of WinXP-PE
-----------------------------------
Some notes about EasyBoot...
A. You can have several different WindowsPE-ISO-files based on NT5-system (change name in textbox in 'easyboot-iso,script')
B. You can also directly launch ISO-files of WindowsPE based on NT6-systems
Note: WindowsPE built from source of Vista\Win7\Server-2008\Win8 are all typical NT6-systems (MsDart60\65\70 is typically NT6-WinPE) .
Please note the difference between WinPE based on NT5 and WinPE based on NT6
NT5-PE must be run using my script, but NT6-PE can be run by simply copy ISO to folder EZBOOT and use menu command; run ***.iso
C. You can even run EasyBoot from USB with these ISO-files from an hided partition and still launch ISO's correctly from such hided partition (both NT5-systems as NT6-systems of ISO-files) 
regards balder
Edited by balder on Sep. 05 2012,02:32
--------------
Download complete set of scripts including help file HERE
Note: Script collection updated 2019-05-19. Scripts mainly support EasyBoot_6.5 or later
|
|
|
|
| Post Number: 7
|
bee4u
Group: Members
Posts: 10
Joined: Sep. 2012
|
|
Posted on: Sep. 05 2012,12:38 |
|
|
@ balder..well i checked the winpe xp iso image without easyboot in virtual machine it worked perfectly. u can burn it on cd it will work as well.
so if it works from cd then why easyboot did not work without using your script?
i appreciate your explanations i do understand what you are saying...
By theway it just worked ONLY ONCE with easyboot 6.53 without using your script....i am surprised why.. afterwards NEVER worked with easyboot without using your script..THX.
|
|
|
|
| Post Number: 8
|
balder
Group: Members
Posts: 1942
Joined: Oct. 2008
|
|
Posted on: Sep. 05 2012,13:10 |
|
|
@bee4u
Quote: "By theway it just worked ONLY ONCE with easyboot 6.53 without using your script"
Yes it could if you at same time (by mistake) had folder I386 in folder disk1 (you could forgotten that folder still was present there)
In such case it 'worked', because needed files could be accessed from the root from the 'forgotten' folder I386 (folder disk1 is the root in Easyboot) - this is what I think happened in your case
And why can't 'winpe xp iso' be launched with menu command; run ***.iso
Because 'winpe xp iso' is hard-coded and do not run from RAM and can hereby not access the needed drivers to continue - you get BSOD when the system fail to find drivers
This is typical for NT5-PE-systems (WinXP-PE is a NT5-system)
But any NT6-system can be launched from EasyBoot by simply copy ISO to folder EZBOOT and use menu command; run ***.iso
Typically NT6-PE is Msdart60 etcetera and a lot of other similar PE based on Vista\Win7\Win8 or Server-2008 that all are examples on NT6-systems
And why is it possible to launch such ISO you may ask
Well it is run from RAM (you can see how the ISO is 'extracted\loaded' to RAM and can hereby find needed drivers to continue)
However the process used in my 'easyboot-iso.script' is not that different...
Anyway... It works to directly launch WinXP-PE-ISO as it is - which is wonderful
regards balder
--------------
Download complete set of scripts including help file HERE
Note: Script collection updated 2019-05-19. Scripts mainly support EasyBoot_6.5 or later
|
|
|
|
| Post Number: 9
|
bee4u
Group: Members
Posts: 10
Joined: Sep. 2012
|
|
Posted on: Sep. 05 2012,14:20 |
|
|
@ balder OK.. may b i put I386 folder in Disk1 folder and it worked.
well i have tried winpe xp with Firadisk ramdriver in the winpe it still didnt work i think it should work from easyboot now.
i tried with grub4dos winpe xp with Firadisk ramdriver it worked ..any idea for easyboot without using your script to run it..it is just an qury...to know any other way to do it with easyboot beside your script..........THX
Edited by bee4u on Sep. 05 2012,14:22
|
|
|
|
| Post Number: 10
|
balder
Group: Members
Posts: 1942
Joined: Oct. 2008
|
|
Posted on: Sep. 05 2012,14:27 |
|
|
@bee4u
Quote: "any idea for easyboot without using your script to run itm"
No basically you need script to solve this issue
No command in EasyBoot works to launch ISO-file of WinXP-PE
Use script and it solves your problem with a breeze
Hmmm... Do you have problem using script or have you already tested it worked that way (it is a little bit unclear to me if it worked alright or not)
regards balder
Edited by balder on Sep. 07 2012,06:12
--------------
Download complete set of scripts including help file HERE
Note: Script collection updated 2019-05-19. Scripts mainly support EasyBoot_6.5 or later
|
|
|
|
|
|
