started by: Behdadsoft
Posted by Behdadsoft on Apr. 20 2012,03:35Hi. I want make multiboot with kaspersky but when use any command don't work it. I use esyboot 6.5 and used this commands :
I want't use script.
Please Guide Me.
Posted by balder on Apr. 20 2012,04:05@Behdadsoft
welcome back @Behdadsoft
Quote: "I want make multiboot with kaspersky but when use any command don't work it"
Read post nr;4 < HERE >
Please notice the difference between launch kaspersky from CD\DVD comparing to USB
I forgot to advice you to NOT test build in Microsoft 'Virtual PC* as kaspersky might fail there
Download 'MobaLiveCD' from < HERE >
Note: Don't create 'hard disk image' when testing ISO-file
Posted by Behdadsoft on Apr. 20 2012,04:17Quote: "welcome back @Behdadsoft"
I've seen this post use script and I I do not want use it.
I use VMWare for test my iso.
Posted by balder on Apr. 20 2012,05:09@Behdadsoft
In post nr,1 you wrote, quote: "I I want't use script."
But now in post nr;3 you write, quote: "I've seen this post use script and I I do not want use it"
I guess you are talking about my script
You really need this script to create a correct 'kicker-image' that launch kaspersky correctly
I don't know why you refuse to use my script 'easyboot-iso.script' as it is needed in plenty of solutions given in EasyBoot
Anyway as I'm consider myself as a friendly person I'll make an exception
1. Open kaspersky.iso (i used UltraIso) and extract folder 'rescue' and file livecd to folder disk1 (don't close UltraIso - keep kaspersky.iso open in UltraIso
2. Rename folder 'rescue' in Easyboot\disk1 to RESCUE (yes rename to uppercase=BIG LETTERS)
3. Now go back to UltraIso and in ISO-file delete folder rescue and file livecd. Now chose to 'save as' reduced ISO-file to folder EasyBoot\disk1\RESCUE with the name KASP.ISO (must be uppercase to file name=BIG LETTERS)
4. Download pre-made 'kicker-image' (zip-file) from < HERE >
5. Extract from downloaded zip-file floppy image (KASP.img) to folder EasyBoot\disk1\RESCUE
6. Use menu command in Easyboot menu: run /rescue/kasp.img
7. check 'Joliet' when creating ISO in EasyBoot
This works from CD\DVD but not from USB
Further more, I'm unsure you can test from VMWare
I also advice you to follow my suggestions in post nr;2 (MobaLiveCD)
Posted by Behdadsoft on Apr. 20 2012,15:20thanks balder.
but don't work this way.
Posted by balder on Apr. 20 2012,15:51@Behdadsoft
Quote: "but don't work this way."
What didn't work
Posted by Behdadsoft on Apr. 21 2012,09:05when I run iso file show this error :
< http://www.pic1.iran-forum.ir/images/up3/34764345705307901791.jpg >
Posted by balder on Apr. 21 2012,09:42@Behdadsoft
This error is typically for wrong name to files and folders (case sensitivity)
Make sure name to folder 'RESCUE' in folder disk1 (folder extracted from ISO-file) IS UPPERCASE=BIG LETTERS
Make sure you put reduced ISO-file 'KASP.ISO' inside folder RESCUE
And finally make sure name to ISO-file inside folder RESCUE is exactly name KASP.ISO
You cannot use KASP.iso must be KASP.ISO
Note: command-lines inside 'kicker-image' (kasp.img) is 100% case sensitive
For just a couple of minutes ago I tested downloaded 'kicker-image'
And followed exactly tutorial in post nr;4
Posted by Behdadsoft on Apr. 21 2012,15:24OK thank.
Kaspersky is work very wll.
but I Maked active & Node32 and work it, but when nod32 begin for scan End soon. I think This a Problem and I want run it with another way. Please Guide ME
THANKS A LOT
Posted by balder on Apr. 21 2012,15:35@Behdadsoft
Quote: "active & Node32"
I'm unsure what you are talking about - could you please be more specific when you explain
I had to guess what you mean here
And I guess that 'acive' is active@boot-disk - is this correct
And that you made active@boot-disk run correctly ist his correct
But you want to use 'Node32' which I again guess is 'Esset-Node32' - is this correct
Could you please confirm if my guesses above is correct - or even better - clearly explain what program and what you problems is - quote: "begin for scan End soon" very cryptic explanation
It would be of a great help, if you could explain what's inside Nod32-ISO-file
Tell me what files and folders you have inside ISO-file of Nod32
Note: If you have folders; 'BOOT', 'EFI', 'SOURCES' and a file 'bootmgr' inside ISO-file - then this is a NT6-system that can be launched simply by copying ISO-file to folder EZBOOT and using menu command: run nod32.iso (or whatever name you use to ISO-file)
If folder structure is as above, you can also test this solution:
1. Extract from Nod32-ISO all folders and also file 'bootmgr' to folder disk1
2. Use menu command in EasyBoot menu: run /bootmgr
3. Only tick 'Joliet' when creating ISO in EasyBoot
Test and see if this works better than only launch ISO-file
However you already have asked about this Nod32 < HERE > and < HERE >
Posted by Behdadsoft on Apr. 22 2012,16:34Thanks balder.
Posted by nikkil on Apr. 27 2012,13:25Issue fixed using Balder's guide. Thanks.
Posted by AhrimanSefid on May 15 2012,05:12all the method and solution you have mentioned before doesn't work, I had tried all of them. it doesn't run or when running it become freeze or sometimes it gave me sector error. any solution would be helpful.
Posted by balder on May 15 2012,05:27@AhrimanSefid
Quote: "all the method and solution you have mentioned before doesn't work"
1. From where do you launch kaspersky (CD\DVD or from USB)?
2. What method do you use to test solution (please read how to test in post nr; 2 < HERE >)?
Note: please reread tutorial in post nr;4 < HERE >
Attention! Tutorial has been modified
I have tested given solution (and others users as well) from both CD\DVD-unit as from USB stick - and it works alright
Note: Take attention to the different solution if run from USB stick - post nr;4 < HERE >
It's vital that you use my script 'easyboot-iso.script' to integrate the reduced ISO-file into EasyBoot structure if run from CD\DVD-unit!
You cannot simply copy reduced ISO-file to folder EZBOOT and set menu command 'run kasp10.iso' - you must use my script 'easyboot-iso.script' to launch reduced ISO-file
Posted by AhrimanSefid on May 15 2012,05:34in the answer of you question:
1- I am launching the Kaspersky from cd
2- I am running it with vmware workstation and program you recommended "Mobalivecd" also I've tried the solution you mentioned in post nr;4. and here is a screenshot from the error I keep getting.
< http://i.imgur.com/QnDyE.png >
Posted by balder on May 15 2012,06:03@AhrimanSefid
Quote: I am running it with vmware workstation and program you recommended "Mobalivecd"
I'm confused here...
Do you launch vmware and run MobaLiveCD from this vmware
If this is the case, it probably will fail in test
Run MobaLiveCD directly from your original host system (in your case Windows Vista)
Attention! You must set UAC (User-Account-Control) to lowest level during test-cycle, otherwise MobaLoveCD is prohibit to run smooth
Note: when changing UAC you must reboot computer to make changes take place.
Another way to test is to use a CD-RW-disk (I still use this way from time to time)
If using such disk, you test build in the 'reality' - the best test method if you ask me
Posted by AhrimanSefid on May 15 2012,06:24sorry for misunderstanding, I am running it with vmware workstation and also program you recommended "Mobalivecd" but getting the same result and error. UAC is completely disabled.
can you upload a video or pictorial tutorial?
Posted by balder on May 15 2012,08:54@AhrimanSefid
Quote: "can you upload a video or pictorial tutorial?"
Yes I can, but I find it hard to understand why you cannot follow given tutorial
Anyway, download zip-file from < HERE >
Extract folder kaspersky from zip-file and double-click to 'kaspersky.html' inside folder
Note: you need flash.movie installed to your computer - which 99% of users already have installed
Posted by AhrimanSefid on May 16 2012,02:24I followed your tutorial and when I wanted to run the final iso file with the Mobalivecd all I get is a blank black screen and nothing else. the only difference I found between what I do and your tutorial is between winbuilder I use and you use. I use the same version of winbuilder as your yours but mine as you can see in the picture below has a different options:
I really tried to do the same thing but still failing. can you make an avira and kasper for me?
Posted by balder on May 16 2012,03:21@AhrimanSefid
Quote: "but mine as you can see in the picture below has a different options"
Yes and I clearly notified this difference in flash movie - but there is no difference regarding how script works according to your 'reduced kaspersky ISO-file'
I'm in a process to upgrade script-collection, but meanwhile you use scripts as usual
Anyway..... You can also try this:
1. Extract folder 'rescue' and file 'livecd' to folder disk1 in EasyBoot
2. Use my script 'easyboot-iso.script' and point to the original kaspersky.iso-file
Okay I know it consume some extra space - but this is only for testing purpose
What I'm saying is; don't manipulate kaspersky.iso-file, use ISO-file as it is in my script.
It's important that you DO NOT run MobaLiveCD from vmware
Must be run from local host-system (your Vista system).
Quote: "can you make an avira and kasper for me?"
Instead do this:
1. Follow tutorial how to integrate kaspersky
2. In folder disk1 you then open folder KASPERSKY (or what ever name you use to your reduced kaspersky-iso-file in script text-box)
3. Open kaspersky.img (or what ever name you used in script text-box)
Note: I use UltraIso
4. Open text-file menu.lst inside that floppy image (use notepad)
Copy text-lines and show me what you have in text-file 'menu.lst'
Today and until Friday, I'm travelling and it can take several ours before I respond - I'll try to capture some 'spare-time' to use in EasyBoot forum
Posted by AhrimanSefid on May 16 2012,03:47Thanks for all of your helps and response but I am kind of in hurry is there any other solution or other way for these stuff. any link or other tutorial would be great.
Posted by balder on May 16 2012,09:13@AhrimanSefid
Quote: “any link or other tutorial would be great
Sorry, this solution works (as you can notice, other users practice given tutorial)
I cannot contribute with more specific solution than given
I quote from my post: ”Open text-file menu.lst inside that floppy image (use notepad)”
I need this information to solve your problem(s)
Posted by AhrimanSefid on May 20 2012,08:09can you make an avira and kasper for me? thanks for all of your replay and time you put.
Posted by AhrimanSefid on May 22 2012,08:01anyone can help and make an avira and kasper together and share them with it's source for me?