Forum: EasyBoot Topic: Boot from hard drive (local os) not working (USB) started by: EB1000 Posted by EB1000 on May 15 2013,05:16
OKOne more minor problem I ran into when booting ezboot from usb. The command: boot 80 will only cause the menu to reload (booting into usb again) instead of booting from the local hard drive... Is there a workaround for this? Thanks Posted by balder on May 15 2013,06:51
@EB1000Quote: "Is there a workaround for this?" Yes there is a solution to this problem First of all, problem is caused by that USB device is not the first bootable partition And when EasyBoot tries to boot from second harddisk, it fails. I'm pretty sure you used my script 'easyboot-usbV2.script' to USB device Anyway... Solution to problem is to copy 'harddisk.img' from my script-folder 'balder\USB_Resources' to folder EZBOOT and use menu command: run harddisk.img This solves the problem with a breeze If you instead have used 'Burn' in EasyBoot this shouldn't happen Note: in some rare cases EayBoot can fail anyway, and in those cases, you use solution above I also notice you are a dedicated user to EasyBoot - nice things going 'your way' even there are some 'bumps' on the road before everything works alright (same to me in many cases ) regards balder Posted by EB1000 on May 20 2013,03:30
Thanks. It works now (of course I now have a new problem.. see other post..
|