|
|
| Post Number: 1
|
Ursus 
Group: Members
Posts: 8
Joined: Sep. 2010
|
 |
Posted on: Sep. 11 2010,16:29 |
|
   |
I am experimenting with ERD Commander 2007 on my multiboot CD and am having a problem. If I boot the original ISO image then ERD fully loads up--it finds the network card drivers, finds the hard drive partitions and lets me explore the computer. When I try to run ERD from EZBOOT it loads up but does not find any drivers (no network, no hard drive, etc) and gives a WINBOM error.
Note that I have XP/SP3 on the same CD. In order to get ERD Commander to boot I have renamed its i386 directory to ERDC, edited the setupldr.bin and erdcboot.bin files to use the right path, and used the hex editor trick to get around the NTLDR error. ERD boots up fine, however it cannot find any drivers. Do I need to edit the txtsetp.sif file or something else?
Thanks
|
 |
|
|
| Post Number: 2
|
balder
Group: Members
Posts: 1942
Joined: Oct. 2008
|
|
Posted on: Sep. 11 2010,16:56 |
|
 |
@Ursus
Quote: ”When I try to run ERD from EZBOOT it loads up but does not find any drivers (no network, no hard drive, etc) and gives a WINBOM error”
It’s a wild guess  but test this:
1. Use UltraIso to create your ISO and use “loader.bin” in folder ezboot as boot-file
2. Don’t check “Joliet” or “Allow lower case” or “DOS (8:3)” leave these unchecked
balder
--------------
Download complete set of scripts including help file HERE
Note: Script collection updated 2019-05-19. Scripts mainly support EasyBoot_6.5 or later
|
|
|
|
| Post Number: 3
|
Ursus
Group: Members
Posts: 8
Joined: Sep. 2010
|
|
Posted on: Sep. 11 2010,19:29 |
|
|
I deleted and recreated the ISO with the following options, still no good
I thought maybe an old file in the XP i386 folder so deleted it and still same error.
I also burned a CD and tried it that way same thing.
Searching through forums it looks like an old problem.
|
|
|
|
| Post Number: 4
|
balder
Group: Members
Posts: 1942
Joined: Oct. 2008
|
|
Posted on: Sep. 12 2010,02:59 |
|
|
@Ursus
Quote: ”looks like an old problem”
Yes you are so right – this problem pops up from time to time 
Not much to help to solve this problem 
However you can try using my script easyboot-iso.script and in script check “Run ISO from ram” - but most likely your problem remains 
Regards balder
Edited by balder on Sep. 12 2010,02:59
--------------
Download complete set of scripts including help file HERE
Note: Script collection updated 2019-05-19. Scripts mainly support EasyBoot_6.5 or later
|
|
|
|
| Post Number: 5
|
Ursus
Group: Members
Posts: 8
Joined: Sep. 2010
|
|
Posted on: Sep. 14 2010,18:40 |
|
|
I used the shareware CDIMAGE GUI tool to create the ISO image, and ERD Commander 2005 started working. Opening the image in UltraISO showed that it was using 8.3 naming syntax with Joliet extensions. When I recreate the image in UltraISO using those options, ERD Commander 2005 works just fine, but the ERD Commander 2010 stuff that uses vistaldr.bin stops working with complaints about can't find bootmgr. Bizarre
Edited by Ursus on Sep. 14 2010,18:40
|
|
|
|
| Post Number: 6
|
balder
Group: Members
Posts: 1942
Joined: Oct. 2008
|
|
Posted on: Sep. 15 2010,03:14 |
|
|
@Ursus
Quote: “but the ERD Commander 2010 stuff that uses vistaldr.bin stops working with complaints about can't find bootmgr. Bizarre”
Test following two options
1. Rename ”bootmgr” to uppercase just to see if vistaldr.bin is able to find bootmgr
2. Test to short name “vistaldr.bin” to erd.bin and see if it works this way
-------------------------------------------------------------------------
However can you please use my script easyboot-iso.script and test if you can avoid problem generated by “DOS (8:3) limit scenario” (do not check “DOS 8:3” when creating ISO in EasyBoot) Â
Note: When using script do not check “Run ISO from ram” as your version of ERD is based on NT6-system (Vista/Win-7/Server-2008) and hereby doesn’t need to be loaded to RAM before launched.
Using this method you might avoid the “Winbom-problem” (if you are lucky) 
balder
Edited by balder on Sep. 15 2010,08:38
--------------
Download complete set of scripts including help file HERE
Note: Script collection updated 2019-05-19. Scripts mainly support EasyBoot_6.5 or later
|
|
|
|
| Post Number: 7
|
|
|
|
|
