|
Post Number: 21
|
balder
Group: Members
Posts: 1942
Joined: Oct. 2008
|
|
Posted on: Apr. 17 2012,13:44 |
|
|
@modecom601
Quote: "I must extract content iso to disk1"
Then its pointless to also use ISO-file
If you extract content of active@boot-disk to folder disk1 you can use menu command in EasyBoot: run /BOOTMGR If using this solution - then you don't need ISO-file at all
Note1: this is exactly what I presented as solution in post nr;2 Note2: I also warned you in same post about licence problem - quote: "But you still have problem with the 'licence issue'"
But at this point you have learned how to modify WIM.BOOT-file (inserted 'BOOTDISK.KEY' using my script ' Mount_Wim-files.script') So at this stage you can simply use method presented in post nr;2
Anyway things is NOT going reverse for you - you are in a progress of quickly learning how 'things can be done'
And it is still a mystery why it doesn't work from run ISO-file
Finally... You may ask; Why am I so anxious to use my ISO-file and launch active@bootDisk
Reason is I might want to integrate setup of a NT6-system (Windows-7 as example) But then I have a problem - as the root already is occupied with same files and folder names as used to Win7 setup-files
And that's the 'heart of the matter'
regards balder
Edited by balder on Apr. 17 2012,13:45
-------------- Download complete set of scripts including help file HERE Note: Script collection updated 2019-05-19. Scripts mainly support EasyBoot_6.5 or later
|
|
|
|
Post Number: 22
|
modecom601
Group: Members
Posts: 16
Joined: Apr. 2012
|
|
Posted on: Apr. 17 2012,15:48 |
|
|
Trick about extracted content to disk1 and use run /bootmgr doesnt work without script moint wim files and vice versa wim files doesnt work without extracting content of .iso. I will optimize my project, when kaspersky works properly It means, I try again use only one trick, not from post 2 + mount wim files. However, it works perfectly, I dont mind that I have got two copies of the same .iso, because it works
Tomorrow I'll try run kaspersky successfully
Im sorry, but still i dont understand your posts fully (definitely about root and NT6), you must'nt explain it, if you wanna not.
Best regards from Poland ;)
Edited by modecom601 on Apr. 17 2012,16:04
|
|
|
|
Post Number: 23
|
balder
Group: Members
Posts: 1942
Joined: Oct. 2008
|
|
Posted on: Apr. 17 2012,16:22 |
|
|
@modecom601
Quote: "Trick about extracted content to disk1 and use run /bootmgr doesnt work without script moint wim files and vice versa"
I maintain my opinion and say it works with methods below
The 'old method' - files and folders on the root and 'run /bootmgr' as menu command
OR the 'latest method' only ISO in folder EZBOOT and 'run active.iso' as menu command
I have tested from both CD\DVD as from USB stick -works excellent - as expected
Note: Both method above needs licence-key in BOOT.WIM of cource
Anyway... I cannot figure out what causes this problem to you
I have an idea (as I'm an curious person) Could you please upload your ISO to some place and in a messenger (in upper right corner in EasyBoot you have 'Your messenger') and send me link to download. This give me opportunity to analyse what's going on
Only if you are interested not necessary as it works with that 'work-around method' of yours
Quote: "Best regards from Poland"
Yes I know somewhere around Grojec or Warka is my guess
best regards to you as well balder
-------------- Download complete set of scripts including help file HERE Note: Script collection updated 2019-05-19. Scripts mainly support EasyBoot_6.5 or later
|
|
|
|
Post Number: 24
|
modecom601
Group: Members
Posts: 16
Joined: Apr. 2012
|
|
Posted on: Apr. 17 2012,16:31 |
|
|
the latest method is using script wim file to overwrite from balder_temporary ;) only iso in ezboot and run iso from command (run active.iso) was my first idea like others programs(for example memtest 3.5 & 4.0 works without combinations) Which iso should I upload to you? Original working only in boot without easyboot? Modified wim file? Working?
You are curious like me, but im furious working in easyboot sometimes
best regards from Poland again
And where are you from?
Edited by modecom601 on Apr. 17 2012,16:32
|
|
|
|
Post Number: 25
|
balder
Group: Members
Posts: 1942
Joined: Oct. 2008
|
|
Posted on: Apr. 17 2012,23:46 |
|
|
@modecom601
Quote: "I must extract content iso to disk1"
To clear things out as I'm still a little bit confused
If I understand you right you must use method below:
A. Modify ISO (using ' Mount_Wim-files.script' and insert 'BOOTDISK.KEY') This must always be done, but that is understood from beginning - licence key must be in file BOOT.WIM - if not - you expiriences 'No licence-key found'
B. However, modified ISO (with inserted 'BOOTDISK.KEY') now works correctly if tested outside EasyBoot (finding licence-key correctly)
C. But used in EasyBoot (run active.iso) ISO fail to find licence-key correctly
D. If extracting contents from ISO to folder disk1 and use menu command 'run /bootmgr' ISO fail to find licence-key correctly
E. However if extracting contents to folder disk1 and also have ISO in folder EZBOOT and use menu command 'run active.iso' ISO find licence-key correctly
Have I understood your problems correctly or am I totally out and 'spinning'
------------------------
I'm interested in the modified wim file (the one that correctly have the correctly 'BOOTDISK.KEY' in file BOOT.WIM) Note: I have already a working active@boot-disk ISO-file which - in my opinion - is one of the very best software to have in EasyBoot - it's excellent
The point with this is; I can test and see if licence-key works correctly in my EasyBoot (it should)
Or even better, you can test finding it on Internet. Use search-words like this: rapidshare active@bootdisk I'm sure you can find the latest version which is 'Active@ Boot Disk v5 Plus (2010)' ----------------------
EDIT: You didn't tell me if you used method with my script 'easyboot-iso.script' (post nr,15) to integrate active.iso into EasyBoot.
To make it 'bullet-proof' I have created a 'kicker-image' (similar to the one script creates)
Test this with your active.iso that is modified with a functionally 'BOOTDISK.KEY'
Do it this way:
1. Copy active.iso to folder disk1 and rename ISO to exactly ACTIVEBOOT.ISO (must be caps/uppercase to letters= BIG LETTERS exactly as it shows)
2. Download 'kicker-image' from HERE and copy image to folder EZBOOT
3. Use menu command in EasyBoot menu: run activeboot.img
4. Check 'Joliet' when creating ISO in EasyBoot
Does it work correctly with 'kicker-image' or is it still failing?
And I'm from Sweden
regards balder
Edited by balder on Apr. 18 2012,01:35
-------------- Download complete set of scripts including help file HERE Note: Script collection updated 2019-05-19. Scripts mainly support EasyBoot_6.5 or later
|
|
|
|
Post Number: 26
|
modecom601
Group: Members
Posts: 16
Joined: Apr. 2012
|
|
Posted on: Apr. 18 2012,10:05 |
|
|
A. I only use script wim files do modify, in tutorial you didn't mention about inserting bootdisk.key. B. Sure, but only using script files. Working C. Right ;( D. Earlier it didnt work, now it works good, I dont understand it, i dont remember if I extracted orignal active iso, or extracted modified .iso(after using wim-script). If you would like i can check it E. Sure, it works good
Now strange is section D
Trying with kicker image script can give us more problems and needless coversation(you can furious on me ;P) If that works perfectly, im happy.
So we have the same .iso. You can use your script on your active. Really should I upload your my .iso? ITs the same ;)
You attacked us in 1655
regards
Edited by modecom601 on Apr. 18 2012,10:06
|
|
|
|
Post Number: 27
|
balder
Group: Members
Posts: 1942
Joined: Oct. 2008
|
|
Posted on: Apr. 18 2012,11:03 |
|
|
@modecom601
I repeat
Do it this way to test if it works:
1. Copy active.iso to folder disk1 and rename ISO to exactly ACTIVEBOOT.ISO (must be caps/uppercase to letters= BIG LETTERS exactly as it shows)
2. Download 'kicker-image' from HERE and copy image to folder EZBOOT
3. Use menu command in EasyBoot menu: run activeboot.img
4. Check 'Joliet' when creating ISO in EasyBoot
Does it work correctly with 'kicker-image' or is it still failing (cannot find license)
----------------------- Quote: "You attacked us in 1655"
He, he that's why I'm so friendly to you
regards balder
-------------- Download complete set of scripts including help file HERE Note: Script collection updated 2019-05-19. Scripts mainly support EasyBoot_6.5 or later
|
|
|
|
Post Number: 28
|
modecom601
Group: Members
Posts: 16
Joined: Apr. 2012
|
|
Posted on: Apr. 18 2012,15:10 |
|
|
Unfortunately, it doesnt work. I tried with original .iso and after modified using script wim files. I have script kicker image too, but i cant use it, i can choose size of floppy etc. thanks for upload .img i followed by your 4 steps, but it doesnt work. Most important is fact that section D and E works (you forgot about modified .iso with wim files script, but I did it:P) Now i havent got duplicate files with .iso, I can tell I optimized my project
On friday/Saturday I must repair kaspersky with checked Joliet
Best regards
|
|
|
|
Post Number: 29
|
balder
Group: Members
Posts: 1942
Joined: Oct. 2008
|
|
Posted on: Apr. 18 2012,15:46 |
|
|
@modecom601
Quote: "Now i havent got duplicate files with .iso, I can tell I optimized my project"
Okay... At least you now can use active@bootDisk - which is a nice step forward
Let's see later how kaspersky works out...
regards balder
-------------- Download complete set of scripts including help file HERE Note: Script collection updated 2019-05-19. Scripts mainly support EasyBoot_6.5 or later
|
|
|
|
Post Number: 30
|
modecom601
Group: Members
Posts: 16
Joined: Apr. 2012
|
|
Posted on: Apr. 21 2012,05:35 |
|
|
Hello again I have problem with extracting kaspersky. I following by steps from post HERE I extracted folder rescue to disk1 - ok But I must extract file rescue from folder boot in .iso(the same name as folder) to the same localization(disk1) http://img163.imageshack.us/img163/1242/kasperskyx.png http://img17.imageshack.us/img17/8315/kasper2.png http://img215.imageshack.us/img215/482/kasper3.png I can not extract file and folder with the same names to one localization. Message, folder about the same name as file is exist. Maybe I try extract file rescue.igz and continue following your steps
EDIT: using rescue.igz I've spotted that message http://img210.imageshack.us/img210/8953/kasper.png and 5 seconds later: http://img441.imageshack.us/img441/1050/omgnx.png
EDIT2: KASPERSKY WORK!!! I tried 2-nd methode to usb(livecd->liveusb etc. ;)) and booting PC from usb KASPERSKY AND ALL PROGRAMS WORKS! But solution with create DVD and load to virtual box doesnt work. Maybe it will wiorks when I burn to real CD/DVD ;)
Thank you so so so so much much much much for your help!!
One (last) question: What is options Key transfer in card file? I didnt see differecnes between To lower, to Capital, Disable.
:):) regards
Edited by modecom601 on Apr. 21 2012,06:16
|
|
|
|
|
|
© 2002-2024 EZB Systems, Inc.
|
|
|