Topic: help
started by: Behdadsoft
Posted by Behdadsoft on Oct. 02 2011,08:53
hi.i want make Multi boot with kaspersky rescue 10 but when i run iso , kaspersky don't work.
Please guide me
Posted by balder on Oct. 02 2011,11:11
@BehdadsoftQuote: "i want make Multi boot with kaspersky rescue 10 but when i run iso , kaspersky don't work."
Test this solution to launch Kaspersky-10 from CD\DVD
1. Make a copy of kaspersky ISO.
2. Open ISO and extract files: image.squashfs, folder rescue and file livecd to EasyBoot\disk1 (I use UltraIso to this operation).
3. Still having ISO-file opened in UltraIso, delete files: image.squashfs, folder rescue and file livecd in ISO as these files are not needed inside ISO any more, save changes to ISO-file (ISO is now also less in size).
4. Use my script "easyboot-iso.script" to integrate reduced ISO-file (in script, do not check “Run from RAM” as it is not needed).
5. Use menu command you get from script in EasyBoot.
6. Attention! Check "Joliet" when creating ISO in EasyBoot.
Note: I tested with this downloaded Kaspersky-10 from < HERE >
balder
Posted by Behdadsoft on Oct. 02 2011,11:44
Thanks. But I do not want use script. I want to do this work without a script. 
Posted by balder on Oct. 02 2011,14:50
@BehdadsoftQuote: "But I do not want use script."
That is regrettable to hear
Anyway as you are so recalcitrant against my scripts
I have a different solution to offer to you Do it this way then (note: I use UltraIso to operation below):
1. Extract everything from kaspersky.iso to folder disk1
2. Extract boot-file from kaspersky iso-file and save boot-file to folder ezboot (I used name kaspersky.bif)
3. Use menu command in EasyBoot: bootinfotable;run kaspersky.bif
4. Check "Joliet" when creating ISO in EasyBoot.
Note: This solution only works from CD\DVD-unit and cannot be used from USB
regards balder
Posted by Behdadsoft on Oct. 02 2011,15:06
This way don't work. show this error when run it :error : file not found
grub rescue>
Posted by balder on Oct. 02 2011,15:15
@BehdadsoftQuote: "This way don't work."
I can guarantee it works
Note: I tested given solution in less than 10 minutes ago - why can't you get it working
Attention! Only check "Joliet" when creating ISO in EasyBoot.
And make sure everything from inside of ISO-file is extracted to disk1 in Easyboot
And by the way - how did you test created ISO-file?
balder
Posted by Behdadsoft on Oct. 02 2011,15:20
I got all the points. for test I use VMWare.
Posted by balder on Oct. 02 2011,15:31
@BehdadsoftQuote: "I use VMWare"
Test iso using mobalive - download < HERE >
Note: you don't need to create "hard disk image" when asked and note that mobalive is a little bit slow in action!
Kaspersky use Gentoo Linux i686 - you cannot be sure it acts properly in VmWare
balder
Posted by Behdadsoft on Oct. 02 2011,15:42
Original kaspersky iso dont any problem but when Create ISO with easyboot don't run it. I test with mobalive but don't run.
Posted by balder on Oct. 02 2011,15:54
@BehdadsoftQuote: "I test with mobalive but don't run"
Well it seems I cannot help you as all solutions presented by me is working in my computer(s) I use several different computers and have no problem with kaspersky (it works great from USB as well using a different approach included help from my scripts of course)
You could always test burn ISO to an CDRW (in this way it won't cost you anything accept some time)
However I think there must be something with your Easyboot installation that might be wrong
If I were in your position, I would simply reinstall EasyBoot to see if it helps
balder
Posted by Behdadsoft on Oct. 02 2011,15:59
OK.Thank you balder.