|
|
| Post Number: 1
|
InToGraphics 
Group: Members
Posts: 3
Joined: Dec. 2009
|
 |
Posted on: Jul. 05 2011,08:11 |
|
   |
Hi,
Following Bootable >> Write Disk Image..., I get the following in the log, and indeed the USB stick will not boot. The boot sector is not recognized (from the BIOS). :
QUOTE 1# Windows 7 6.1 Build 7601 (Service Pack 1)
2# ST Â Â Â 8GB Â Â Â Â Â Â 0000
3# Preparing data ...
4# Write Method: USB-HDD+
5# C/H/S: 974/255/63
6# Boot Sector: Unknown
7# WARNING! USB disk created from ISO image may not boot properly!
8# Preparing media ...
9# Number of blocks in ISO image is 30927
10# Start Writing ...
11# Finished Writing
12# Start Verifying ...
13# Verify successful!
14# Synchronizing Cache ...
15# Burn successful!
So I formatted the USB stick (properly; Quick Format unticked) to rid off possible garbage.
And tried again. Same problem.
I re-downloaded from VMware here : VMware-CPU-Compatibility-e.x.p-160658.zip
New attempt, problem persists.
I just contacted VMware support by email to ask whether the content of the zip is possibly corrupt, but I am still waiting for a response. It usually takes 4 hours upto a day for them to respond.
What do you think ?
Is the problem with the contents of the zip, or with UltraISO ?
I will check the name/type of the boot sector the BIOS flashed at me, and edit this post.
EDIT:
This is what I see when I try to boot from the USB stick. The message is repeated umpteen times, scrolling the screen up. :
QUOTE No Systemdisk. Booting from harddisk. Start booting from USB device... Disk formatted with UltraISO 9.0 © 2002-2008 EZB Systems, Inc. Home page: http://www.ultraiso.comBootsector from C.H. Hochstatter
Edited by InToGraphics on Jul. 05 2011,09:59
|
 |
|
|
| Post Number: 2
|
rope
Group: Members
Posts: 49
Joined: Mar. 2011
|
|
Posted on: Jul. 05 2011,08:43 |
|
 |
if your usb stick...  is finest whit burning  and you see burning succesfull ... you have to change  the booting methode and set usb as first  booting device...
the stick can only boot if you bios  has  booting option for usb device  , when not  it can not boot  ..
if  the usb stick is not booting  from startup ... and you have the option to boot from a usb device ...it propperly meens that your  iso file is corupt / ore maybe has a missing file
http://imageshack.us/photo/my-images/707/snap20110701091518002.png/
http://img199.imageshack.us/img199/1666/snap20110701093340003.png
is see in you pic boot sektor unknown !!  so i think its a wrong  ore corrupt file ..
.. as you can see in mine pic  of writing a usb stick  the iso file i use is a lot bigger ..
Edited by rope on Jul. 05 2011,09:10
|
|
|
|
| Post Number: 3
|
InToGraphics
Group: Members
Posts: 3
Joined: Dec. 2009
|
|
Posted on: Jul. 05 2011,10:36 |
|
|
Of course I changed the boot method.
It's a HP dm1-3125ed thin & light. I have to press the [ESC]-key at boot to get the menu, and then from the menu the [F9-key] to get to the boot options.
Which are only harddisk or USB stick. There is no optical drive in it.
I already re-downloaded the ZIP image twice (3 times in total).
I did a Test archive with WinRAR and each time I get the message "No errors found during test operation".
I also cleared all browser caches with CCleaner before re-downloading. That's why I shot an email message to VMware Support to check on their end if the content of the ZIP archive was possibly already corrupted before archiving it into the ZIP.
I also tried with Tools >> Burn CD/DVD Image... F7
But then I get the following in the log.
I assume because it can't find a real optical drive.
(Which is a bit of a weird way to let the user know.)
QUOTE 1# Windows 7 6.1 Build 7601 (Service Pack 1)
2# You need admin privileges to run this operation.
The size of the ISO file is correct. It should be 130KB according to the webpage at VMware. And that's also the download size.
It's just a small utility program to profile the capabilities of the CPU to determine which features of VMware are supported in hardware by the CPU.
[offtopic]
It's the same check which all VMware desktop products perform before allowing booting any Guest VM.
For instance, if you created a 64-bit guest VM, and then boot it up, Â but your CPU can not handle 64-bit Guest VM's (the required hardware support is missing : AMD's AMD-V, or Intel's VT-x).
Then VMware WS will refuse to boot into the 64-bit Guest VM.
With this utility you can determine which of all these hardware requirements for virtualization are met. Especially with a new CPU like the AMD E-350 (Brazos) in my notebook.
[/offtopic]
This is in the README.cpuid file in the archive :
QUOTE VMware CPUID README
Overview: The cpuid.iso image can be used to create a bootable CD that
aids in processor and feature identification. Specifically, this tool
will help in determining hardware support for 64-bit guests and CPU
features for VMotion compatibility. The following steps outline its usage:
1. Burn a CD from the image
2. How to run the program:
After the bootable CD image has been copied to a CD-R or CD-RW, insert the
CD directly into the chassis, and reboot the machine. The boot order in the
BIOS may need to be configured so the machine boots from CDROM in the
disk drive.
3. How to interpret the output:
[...]
I can boot and install various flavours of Windows, and  Linux from USB stick, and only install OS X from USB stick to get a Hackintosh.
But a pesky little 130KB utility is a problem. 
Sometimes bigger is better. 
|
|
|
|
| Post Number: 4
|
rope
Group: Members
Posts: 49
Joined: Mar. 2011
|
|
Posted on: Jul. 05 2011,15:39 |
|
|
i have downloadted the same file and burn this to a usb stick  succes full ..
after downloading  i extract only the iso file ..
then i opent ultra iso en choose the tap bootable..hit in this menu 'write disk image "
then i selected the 4Gb usb stick  ..choose the file to write..
and started writing..
after a few seconds the message appears burning succesfull
http://img804.imageshack.us/slidesh....002.png
note ....i instalted the ultra iso  whit a right klik on setup.exe and choose run as administrator ..maybe you did't
note : i restarted the computer  and choose to boot from usb , wel the usb he started  to boot !! but i unterrupted this  whit the tap esc
Edited by rope on Jul. 05 2011,16:02
|
|
|
|
| Post Number: 5
|
InToGraphics
Group: Members
Posts: 3
Joined: Dec. 2009
|
|
Posted on: Jul. 06 2011,17:50 |
|
|
I see the same error message and warning in the screenshot you posted :
QUOTE Boot Sector: Unknown
WARNING! USB disk created from ISO image may not boot properly!
And for me it doesn't boot. The BIOS throws the following at me (as per my edit in post #1). I guess that I just have bad luck. because I already tried 2 other USB sticks. :
QUOTE No Systemdisk. Booting from harddisk. Start booting from USB device... Disk formatted with UltraISO 9.0 © 2002-2008 EZB Systems, Inc. Home page: http://www.ultraiso.comBootsector from C.H. Hochstatter
And VMware supports response was that the download at their site was not already corrupted before ZIPing it up.
They even sent me a copy attached to the email to have a go with that. But it didn't work out for me. Same message when booting from any of the 3 USB sticks. VMware support will find out at their end which features the AMD E-350 supports, and then give me some feedback.
P.S. the utility only profiles your CPU to find out what virtualization features it can support in hardware, and then shows you a screen with the results. ;)
Edited by InToGraphics on Jul. 06 2011,17:52
|
|
|
|
|
|
|
© 2002-2024 EZB Systems, Inc.
|
|
|
