|
|
| Post Number: 1
|
balder 
Group: Members
Posts: 1942
Joined: Oct. 2008
|
 |
Posted on: Jun. 14 2011,14:13 |
|
   |
”Service-post”
On request from many users to my USB-related scripts, I have heavily updated two scripts.
And that is the “easyboot-usb.script” and “easyboot-grub-iso.script” that before was prohibit to format USB devices with several partitions – but is now able to perform such process.
This means if you – as example – use USB harddisk with several partitions, script is able to find the first partition (usually first partition also is the “active” partition).
Note: “easyboot-usb.script” has its name changed to: “easyboot-usb_v2.script”
Another example:
My computer has one harddisk with two partitions which is presented in Windows explorer as C: and D:
If I connect my USB harddisk (that also has two partitions), Windows explorer show drives; C: and D: and the two USB partitions E: and F:
Both scripts now analyse your USB device and automatically chose drive letter E: as target.
The “easyboot-usb_v2.script” can also totally avoid any format to USB device regardless how many USB partitions that is showed in Windows explorer.
You can hereby “update” your ISO-file (preferably EasyBoot-ISO-file) without anything else is deleted.
You can also check “Automatically run defrag” in script to avoid: "Error 60: File for drive emulation must be in one contiguous disk area"
Again this script automatically chose the first USB drive letter it can find as target!
Only chosen ISO-file and grub-files including grub-MBR is updated.
Note: Built-in limit that only one USB device can be connected at same time is still in scripts to avoid lost of data from other USB devices! This means that you cannot have USB-DVD-drive connected at same time as you connect some other USB device (USB harddisk or USB stick device).
Scripts automatically halts and complains and also refuse to go any step further in process!
I also updated help in “easyboot-grub-iso.script” with a flash video sequence – question is; is this better help for a “new “user 
Balder
--------------
Download complete set of scripts including help file HERE
Note: Script collection updated 2019-05-19. Scripts mainly support EasyBoot_6.5 or later
|
 |
|
|
| Post Number: 2
|
balder
Group: Members
Posts: 1942
Joined: Oct. 2008
|
|
Posted on: Jul. 01 2011,17:20 |
|
 |
IMPORTANT INFORMATION!
Two scripts has been heavily updated 
The two scripts are “easyboot-usb.script” and “easyboot-grub-iso.script”.
There was a bug in script(s) that stopped script(s) to run, if computer was equipped with more than one internal harddrive 
Nothing has been destroyed, but script basically refused to run properly, if your computer used more than one internal harddisk.
It doesn’t matter if your internal harddisk has several partitions – that is okay.
Same to USB device – script accepts several partitions on USB device as well 
Anyway - it is now solved 
Note: Scripts can work with up to 9 drives (8 internal harddrives at same time and is still capable to decide which USB drive that is the target).
Scripts always choose the first USB drive letter as target.
Scripts also – due to safety - refuse to run if you at same time have two USB devices connected to computer
It doesn’t matter what kind of USB devices you use – harddisk unit(s) or USB stick(s).
Script has full control what’s going on
Please skip your present folder “WinBuilder_Complete” and do a new download.
Sorry for the inconvenience this has caused.
balder
--------------
Download complete set of scripts including help file HERE
Note: Script collection updated 2019-05-19. Scripts mainly support EasyBoot_6.5 or later
|
|
|
|
| Post Number: 3
|
|
|
| Post Number: 4
|
|
|
| Post Number: 5
|
balder
Group: Members
Posts: 1942
Joined: Oct. 2008
|
|
Posted on: Jul. 10 2011,01:27 |
|
|
@rybshik
As a new member I say welcome @rybshik 
Quote: “would  the scripts help to write Acronis bootable ISO to USB Flash”
I guess it would
Test solution to Acronis ISO-file HERE
You instead simply use any name to ISO-file in “easyboot-iso.script” textbox to your Acronis-ISO file
Attention: I’m travelling around and do not have my stationary computer with necessary software available.
I won’t be home before 18 July and cannot fully participate with solutions at present time
Sorry if above solution doesn’t work you have to wait
Regards balder
Edited by balder on Jul. 10 2011,01:30
--------------
Download complete set of scripts including help file HERE
Note: Script collection updated 2019-05-19. Scripts mainly support EasyBoot_6.5 or later
|
|
|
|
| Post Number: 6
|
balder
Group: Members
Posts: 1942
Joined: Oct. 2008
|
|
Posted on: Jul. 10 2011,01:31 |
|
|
@rybshik
Ladies and gentlemen, I’m travelling around (its holiday season ) and cannot fully participate to solutions at present time
I won’t bee back at my home residence until 18 July
Sorry for the inconvenient this might cause all fans of easyboot
balder
--------------
Download complete set of scripts including help file HERE
Note: Script collection updated 2019-05-19. Scripts mainly support EasyBoot_6.5 or later
|
|
|
|
| Post Number: 7
|
balder
Group: Members
Posts: 1942
Joined: Oct. 2008
|
|
Posted on: Aug. 09 2011,02:58 |
|
|
@Ladies and gentlemen, time has come to expand my collections of scripts
New script is added to download 
And the new script is "USB-NT6-SETUP.SCRIPT"
This script make USB stick\thumb-drive launch setup of any NT6-system (Vista OR Win-7 OR Server-2008).
Script refuse to operate to any USB harddisk.
You can only use USB stick\thumb-drive
I have found out that this is the most reliable method to run setup of NT6-system from USB
Please read carefully help in script - push help-button in script
Download is available below in every post I write in this forum
Regards balder
--------------
Download complete set of scripts including help file HERE
Note: Script collection updated 2019-05-19. Scripts mainly support EasyBoot_6.5 or later
|
|
|
|
| Post Number: 8
|
balder
Group: Members
Posts: 1942
Joined: Oct. 2008
|
|
Posted on: Aug. 12 2011,14:21 |
|
|
Attention!
Scripts has been modified to match the new release of EasyBoot (version-6)
You must download and replace your present folder "WinBuilder_complete" with the new one from "balder.zip"
Scripts has been adjusted to fit both earlier versions of EasyBoot, as well as the brand new version-6 (you are highly recommended to upgrade your EasyBoot to version-6)
Information about new version-6 HERE
Download script-collection below as usual Â
Regards balder
--------------
Download complete set of scripts including help file HERE
Note: Script collection updated 2019-05-19. Scripts mainly support EasyBoot_6.5 or later
|
|
|
|
| Post Number: 9
|
balder
Group: Members
Posts: 1942
Joined: Oct. 2008
|
|
Posted on: Aug. 26 2011,01:31 |
|
|
Updates done to scripts that manage USB devices:
These scripts now support any USB unit up to 8 terabytes if choosing FAT32
Note: limit is related to FAT32 file-system and not to script itself.
If choosing NTFS as file-system on USB-unit, there is practically no limits to what size USB unit can have (though FAT32 file-system is recommended as first choice).
The "Defrag-option" is updated to work in both NT5-systems (NT5=typically WinXP) and in NT6-systems (NT6=typically Vista\Win7).
Hopefully I have not created any bug in script
Please report back if bug is found in script Â
Updates to script that manage ISO-files:
"Grub-kicker-images" used in script to launch ISO-files, is reduced 80% in size for faster response.
Improvements to integration of Hiren's BOOT-CD (new recommended settings and EasyBoot menu commands = more universal)
regards balder
--------------
Download complete set of scripts including help file HERE
Note: Script collection updated 2019-05-19. Scripts mainly support EasyBoot_6.5 or later
|
|
|
|
| Post Number: 10
|
balder
Group: Members
Posts: 1942
Joined: Oct. 2008
|
|
Posted on: Sep. 02 2011,14:02 |
|
|
To whom it concerns
New script "easyboot-hiren_v14*" developed to better support Hiren's BOOT-CD!
Attention! Script only support fully out Hiren_v14.1 and higher
Intensions with script is:
1. Integrate the whole Hiren and automatically give user the right EasyBoot menu command to launch the whole Hiren from both CD\DVD as from USB
2. Checkbox - if checked - only integrate Hiren MiniXP and skip everything else and give user the right EasyBoot menu command to launch the Hiren MiniXP from both CD\DVD as from USB.
3. Option one, create ISO-file of MiniXP to launch in EasyBoot or option two, skip ISO-file and instead run MiniXP from reduced HBCD-folder (takes a few MB less in space) and still give user the right EasyBoot menu command to launch MiniXP from CD\DVD as from USB to both options.
4. Perhaps most important, you don't need to check "Allow Lower Case" when creating ISO in EasyBoot
balder
Edited by balder on Sep. 02 2011,16:36
--------------
Download complete set of scripts including help file HERE
Note: Script collection updated 2019-05-19. Scripts mainly support EasyBoot_6.5 or later
|
|
|
|
|
|
