|
|
| Post Number: 1
|
thebaz67 
Group: Members
Posts: 2
Joined: Dec. 2009
|
 |
Posted on: Dec. 29 2009,14:44 |
|
   |
I created an ISO file from an existing CD-ROM I have. I extracted 2 files. Deleted those files from the ISO.
I made some minor edits to these 2 files, then I added them to the ISO file.
So far everything seems fine.
I save the ISO then I burn it to a CDR. After burning I can only open one of the 2 files. The other gives the following error
Cannot open the E:\PARAM.SYS file.
Make sure a disk is in the drive you specified.
I received no errors while burning the ISO and when I open the file in the ISO prior to burning it opens properly.
Any Help?
thanks
Baz
|
 |
|
|
| Post Number: 2
|
xoben
Group: Super Administrators
Posts: 2200
Joined: Nov. 2004
|
|
Posted on: Dec. 29 2009,20:44 |
|
 |
Suggestion:
1) Open the ISO file, choose 'File'->'Create File Checksums' from main menu to get a .md5 file
2) Choose 'Tools'->'Verify CD/DVD Checksums' to verify files on the burned CDR
|
|
|
|
| Post Number: 3
|
thebaz67
Group: Members
Posts: 2
Joined: Dec. 2009
|
|
Posted on: Dec. 30 2009,11:33 |
|
|
I tried what you suggested and the checksum for the file in question fails. All the others are correct. Is there anything I can do to get around this?
|
|
|
|
| Post Number: 4
|
xoben
Group: Super Administrators
Posts: 2200
Joined: Nov. 2004
|
|
Posted on: Dec. 30 2009,22:59 |
|
|
Possible problem:
1) Try to burn another CDR, and see if it is a media related problem
2) If the CDR is too full, files reside on the outer border of the disc may not be accessed properly. My suggestion is: Open the modified ISO, Choose 'File'->'Properties' from main menu and check 'Optimize', then save as a new ISO and try to burn again.
|
|
|
|
|
|
